Overview
========


Toolchain supported
===================
- IAR embedded Workbench  8.50.1
- Keil MDK  5.30
- GCC ARM Embedded  9.2.1
- MCUXpresso  11.2.0

Hardware requirements
=====================
- Mini/micro USB cable
- EVKB-IMXRT1050 board
- Personal Computer
- Network cable RJ45 standard (Network with Internet access)

Board settings
==============
- for OM- SE050ARD
- SDA J15 Only Pin 1 & 2 connected using jumper
- SCL J17 Only Pin 1 & 2 connected using jumper


For SE050
- Connect OM- SE050ARD to the board.
- The SE050 on board requires Keys & certificates provisioned for cloud connectvity demos.
- Please consult SE050 user manual and Plug & Trust middleware documentation which is present in the
  Plug & Trust MW package for further details.
- The Plug & Trust MW package can be downloaded from
https://www.nxp.com/products/security-and-authentication/authentication/:SE050?tab=Design_Tools_Tab
- Please refer to the RST file in the doc folder for additional details about the example.
Prepare the Demo
================

Running the demo
================

Customization options
=====================

