Hardware requirements
=====================
- 2x Mini/micro USB cable
- MIMXRT1060-EVK board
- Personal Computer
- FreeMASTER 2.5 or later installed on PC

Board settings
============
No special settings are required.

Prepare the Demo
===============
1.  Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
2.  Connect a USB cable to the other USB port on the target board.
3.  Compile and download the program to the target board.

Running the demo
================
4.  Run FreeMASTER and use connection wizard to connect at 115200 bps on newly discovered virtual serial port on PC.
5.  Click on "FreeMASTER Demonstration Project (embedded in device)" on the Welcome page
6.  Read more information about FreeMASTER tool at http://www.nxp.com/freemaster
